Trijicon RMR SRO / Holosun 407 / 507 / 508 GLOCK MOS Adapter plate V3
The CHPWS V3 GLOCK MOS adapter plate is the most rugged, reliable, and trusted red dot adapter plate on the market today. Approved for duty use by over 400 Local, State, Federal and US Military units, this adapter plate will ensure your red dot stays on your slide where it’s suppose to be.
All CHPWS V3 plates are 100% Made In America, using only American Made Material, by Americans. Each V3 plate is fabricated from 6061 precipitation-hardened aluminum alloy and then finished withType III Black hardcoat anodize per MIL-Spec-A-8625
Fills those ugly sight gaps in front and behind your Red Dot
Four locating pins / lugs
Thinner design, Lighter Design, more than Twice the Thread Engagement to secure your red dot to the plate.
The screw sizes are machined into the plate in case you need more, you’ll know the size and length!
The C&H Adapter Plate allows you to mount your Trijicon RMR or your Holosun 507 Reflex Sight to your GLOCK MOS slide perfectly
Comes with M3 screws to secure the plate to your pistol as well as 4-40 screws to secure your RMR or Holosun to the plate.
There will be no more gap, everything looks nice and neat on your Glock MOS. Comes with two screws.
This adapter plate does not include the Trijicon RMR or the Holosun Reflex sight.